MAGNETEK Industrial Partner

CIMR-V7AM23P71 - Magnetek CIMR-V7AM23P71 High Performance Variable Frequency AC Drive/Spindle for induction...

larger image

Request Quote
For Price
Part Number:
CIMR-V7AM23P71
Model Number:
CIMR-V7AM23P71
Make:
MAGNETEK
Lead Time:
Available
Qty In Stock:
Available

Magnetek CIMR-V7AM23P71 High Performance Variable Frequency AC Drive/Spindle for induction motors Simple Type: Variable Speed Drive

The V7 Drive is a high performance AC drive for induction motors, providing low motor noise and high starting torque. The V7 provides two control methods; V/f and open loop vector control for precision speed regulation applications. In addition to good speed regulation, open loop vector control also provides higher torque at lower speeds. The V7 is intended for constant torque applications, with current overload rating of 150% for 60 seconds. The V7 is fully featured and compact. The digital operator provides 4-digit LED status display with a built-in analog speed potentiometer, as well as digital programming of almost 200 parameters. The digital pulse train input provides a precise frequency input, and is the perfect solution for speed/follower applications. The seven standard multi-function inputs can be programmed to allow for 17 preset speeds. The V7 also has an analog input, a multi-function output, two multi-function open collector outputs, and an analog output as standard.

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 0-10 VDC (20 kohms) or 4-20 mA (250 ohms)
  • 0-10 VDC proportional to output frequency or output current
  • 16 multi-speed settings plus jog speed
  • 16-bit microprocessor logic
  • 2 programmable open collector outputs
  • 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
  • 3 Critical frequency rejection settings
  • 7 multi-function digital inputs
  • Adjustable accel/decel: 0.01 to 6000 seconds
  • Analog monitor output:
  • Approximately 200 parameters
  • Auto restart
  • Baud rate of 19.2 kbps
  • Carrier frequency: 10 kHz maximum
  • Cooling fan controlled by drive run/stop
  • Copy Keypad Function
  • DC injection braking, ramp to stop
  • DC Injection braking: adjustable amplitude, duration, current limited
  • Digital keypad operator with analog speed pot
  • Digital pulse train input (30 kHz max.)
  • Dynamic Braking Transistor
  • Electronic reversing
  • Energy Savings Function
  • LED status display
  • MTBF: exceeds 28 years
  • NEMA 1 enclosure
  • Open loop vector control
  • PID with loss of feedback function
  • Power loss ride-thru: 0.5 sec.
  • Programmable form C output contact for customer use: 1A at 250 VAC or 30 VDC
  • Remote Mount Keypad Capability
  • Remote speed reference:
  • RJ45 Style Digital Operator Connector
  • RS-485/RS-422 serial communication port (up to 32 nodes)
  • Signal follower: bias and gain
  • Slip Compensation
  • Speed search
  • Torque boost: full range, auto
  • UL and cUL listed; CE approved
  • UL recognized electronic overload

Specifications

    General
  • 1-Phase Input - Rated Output: AC3PH 3.0HP 11.6Amp 0-400Hz
  • 3-Phase Input - Rated Output: AC3PH 5.0HP 17.5Amp 0-400Hz
  • Altitude: to 3280 ft; higher by derating
  • Ambient service temperature: -10° to 40°C (14° to 105°F)
  • Ambient storage temperature: -20° to 60°C (-4° to 140°F)
  • Category: AC Drives Inverters
  • Control method: V/F, Open loop vector control
  • Controlled speed range: 40:1(1); 100:1(2)
  • Digital inputs: 7 multi-function digital inputs
  • Frequency resolution: 0.01 Hz with digital reference, 0.06/60 Hz with analog reference
  • Humidity: to 95% non-condensing
  • Input frequency: +/-5%; 50/60 Hz
  • Input voltage: -15% to +10%; 200 to 230 VAC, 380 to 460 VAC
  • Overload capability: 150% for 60 seconds
  • Power loss ride-thru: 0.5 sec.
  • Protection level: IP20/NEMA1
  • Rated Input: 200 - 240VAC (3-Phase or 1-Phase); 26Amp 50-60Hz
  • Ratings: 1/8 to 10 HP at 230 VAC, 1/2 to 10 HP at 460 VAC
  • Serial interface: RS-485/RS-422 serial communication port (up to 32 nodes)
  • Service factor: 1.0
  • Shipping weight: 8 lb
  • Standards: UL, cUL, CE
  • Torque boost: full range, auto
  • VFD efficiency: 95%

 

Applications

  • None Available

Aliases

  • None Available