CDBM-2015 - Magnetek CDBM-2015 Braking unit supply voltage 200V turn on voltage 330V

CDBM-2015 - Magnetek CDBM-2015 Braking unit supply voltage 200V turn on voltage...

Magnetek CDBM-2015 Braking unit supply voltage 200V turn on voltage 330V Simple Type: TBD

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

allowable input voltage fluctuation: +10% or-15% of nominal
Circuit protection: Ground fault and blown-fuse protection
Control Method: fully digital, sine wave, pulse-width-modulated; sensorless vector
Elevation: 3300ft (1000m) or less
frequency reference resolution: Digital: .01 Hz analog: .03 Hz (at 60 Hz)
Heatsink over temperature: thermostat trips at 105 degrees
Humidity: 90% relative; noncondensing
Motor overload protection: Electronic thermal overload relay; field-programmable
Output Frequency resolution: .01 Hz
Output Speed Control Range: 100:1
Over current protection level: 200% of rated current
Over voltage protection level: 400/800/1000VDC
Overload capacity: 120% of rated load for 1 min
rated frequency: up to twice motor nameplate rpm(swift-Lift) 120 Hz Max
Rated input power supply volts& frequency: 3-Phase 200-220 or 380-460 or 500-600; 50 or 60 HZ
Under voltage Protection level: 190/380/546VDC
Vibration: 1 G less than 20 Hz; 0.2 G for 20-50 hz